NEPROS - ATP9022 Door and Gate Stopper Set for Car Detailing, 2 Pieces

NEPROS ATP9022 Door and Gate Stopper Set for Car Detailing, 2 Pieces

This is a door and gate stopper set for car detailing. It holds a door, rear gate, hood, or panel open so you can work with both hands and not worry about it swinging back.

I know how this goes in the garage. You are cleaning a door jamb, polishing a door edge, or wiping down an interior, and the door drifts. Now you are stopping every few minutes to push it back. This set fixes that. You set it once, and the door stays where you put it.

The door stopper holds doors, hoods, and panels. The gate stopper holds rear gates, and you can change its length in 50 mm steps. Both attach to the door striker, and the door lock secures the door. They work with strikers 10 mm or smaller, which covers almost all car models. Both pieces are slip-resistant, so they stay put once you set them.

This set does not work on vehicles with an automatic locking function. Check your vehicle before you order.

Features

• Holds doors, rear gates, hoods, and panels open while you work
• Slip-resistant design keeps each stopper in place
• Gate stopper length adjusts in 50 mm steps
  
• Door lock secures the door once the stopper is in place
• Fits strikers 10 mm or smaller
• Works on almost all car models
• Easy to install and remove
• Sold as a 2-piece set only

Where You Will Use It

• Cleaning and sealing door jambs
• Polishing and correcting paint near door edges
• Interior vacuuming, wiping, and conditioning with the door held open
• Washing and drying around the rear gates and hatches
• Working under a hood or around a panel

FAQ

Will this fit my car?
It fits almost all car models that have a striker 10 mm or smaller. Measure your striker first.

Does it work on vehicles with automatic locking doors?
No. This set does not work on vehicles with an automatic locking function.

Can I buy the door stopper or the gate stopper by itself?
No. I only sell them together as a set.

Can I use it to hold a hood open while I detail the engine bay?
The set holds hoods and panels, so yes. Check that it attaches securely to your vehicle before you start work.

Can I change the length of the gate stopper?
Yes. The length adjusts in 50 mm steps.