I started the search for a wall-mountable pressure washing solution years ago when I built the wash bay at my old house. I headed down a rabbit hole that kept leading me down dead ends.
Too much noise, not enough flow, fit/finish/quality concerns, are all issues I encountered. That is the reason I ended up deciding to take a gamble on the Kranzle K165STS that had in my wash bay. It certainly is great at 2800PSI and 2.8 GPM and looks absolutely fantastic.
The cons: it's loud, cycles for 30 seconds before turning off, and weighs 180lbs. Oh...another small issue...it was $4500 and they no longer make it!
What I really wanted for all of us is a small, compact pump that I could put on a shelf that looks and works like the Kranzle K1122TST. That is the main component of my Obsessed Garage Complete Kranzle Pressure Washing Solution. There are significant advantages to having that cart model, but what if you wanted to mount it on the wall with permanent plumbing, and a hose reel?
After the massive success I had with the Kranzle K1122 package and my need for another wall-mounted solution for OGHQ, I decided to design a less costly, more efficient wall-mounted solution. I bought a K1622 that was currently available. It is a 1600 PSI, 1.7GPM pump...but...it runs continuously. It doesn't have the "Total Stop" function the K1122TST has.
It just wasn't good enough for our application. Although the pump can run for hours in bypass mode, I think we want the pressure switch that would make this pump function better for car washing.
Selling about 500 Kranzle pressure washers in 2017, got us a seat at a table with the engineers. I did everything short of begging for a higher flow, lower pressure, and lower cost pump that we can wall mount. I also want it to shut off when you release the trigger.
I basically asked them to take the pump from the 1122 and put it on the chassis of the former K1622 model. So...we've now got it, and it is called the K1322TS.
- Tested Flow: 1.9 GPM
- Tested Pressure: 1010 PSI
- Tested Current: 13.5 A with 4.0 Orifice Nozzle, 16.2 A with 1.25mm Orifice Foam Cannon
- 3 Piston Wobble Plate Pump
- 35’ Power Cord with GFCI
- Electrical Requirements: 110 V, 15 A (Recommended 20 A circuit for use with foam cannons)
- Inlet: ¾” Female GHT
- Outlet: M22 Male (14mm)
- Dimensions: 18.75” W x 7” D x 12.5” H
- Weight: 43 LBS
- Max Temperature 140°F
Kranzle offers a 1-year warranty for commercial use and 2 years for home use. Info about their warranty can be found HERE. If you ever have a problem with your machine, reach out to us. Before you send us an email, try to work through the issues yourself in our FAQ and Support tab. Sometimes it’s a simple fix if you’re having trouble.
FAQ & Support
User ManualKranzle K1322TS Operating manual with spare parts list
What is the best pressure washer?
Will a Kranzle pressure washer work with a water tank?
Can I use a Kranzle with a generator? What wattage do I need?
How To Buy: Setting up a Kranzle K1322TS for a Mobile Detailer Tralier/Van - Generator and Water Tank.
What is the difference between the K1622TS and the K1322TS? (Hint: Just get the K1322TS)
Why Should I Upgrade My Sprayer and Which One Should I Get? - Upgrading Your Sprayer
Pressure Washer Fittings 101: Fittings and QD Naming
Pressure Washer Fittings 102: Applications and Usage
Pressure Washer Fittings 103: Spray Nozzles
How To: Proper Layout and Setup for Kranzle Custom Install Solution.
How To: Properly Shorten Kranzle Power Cord
How To: Kranzle Oil Change
How To: Set up your inlet hose or garden hose with quick disconnects
How To: Kranzle Teardown and Maintenance Deep-Dive.
How To: Setting up a Wall-Mounted Kranzle Inside with an External Hose Reel Outside
Why is my gun or wand (1/4" Coupler) leaking from the outlet?
Why is my 3/8" coupler leaking from the end?
Why didn't I receive all of my garden hose quick disconnects? I only received two garden hose fittings!
Troubleshooting: Garden hose / inlet hose is leaking at the threads.
Troubleshooting: Kranzle leaking oil from the bottom of the casing - Kranzle Pump Oil Leak.
Troubleshooting: Kranzle Inlet Leaking Water - Garden Hose Connection.
Troubleshooting: I just got my Kranzle and it's dripping / leaking oil!
Troubleshooting: Kranzle tripping with foam cannon even on a 20A circuit.
Why does my Kranzle pressure gauge show a high or low pressure-reading?
This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs calculated at checkout.