The guys at OG and BendPak have been bugging me about getting an affordable lift offering in the store, and now they're available. The HD-973P is for those that have tall ceilings looking to put a triple lift in their garage or shop. Each platform operates independently of each other so you can set each platform at a custom height.

Features & Specifications

• Features
• Perfect for parking, storage and service
• 7,000 lb. capacity upper deck
• 9,000 lb. capacity lower deck
• Superstructure features durable powder coat finish
• Perfect for cars, trucks, and SUVs
• Platforms feature full-length aluminum decking
• Rugged welded-steel construction
• Powerful hydraulic cylinders
• Heavy-duty 3/8” lifting cable
• Heavy-duty steel construction
• Wide base-plate for maximum stability
• Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze
• Integrated hydraulic flow restrictor provides controlled descent in event of hose rupture
• Reliable electric-hydraulic power system
• Multi-position safety locks in each column
• Automatic safety locks combined with redundant anti-fall devices
• Adjustable lock ladders
• Independent backup slack-cable safety latches
• Push-button pneumatic safety release.
• Padded trip bar with limit switch prevents lower vehicle from making contact with upper platform.
• Simple controls
• Optional drive-thru ramps available
• Optional 4,500-lb. air-hydraulic rolling jacks available
• Specs

• Top Platform

• Lifting Capacity* 7,000 lbs. (3,175 kg)
• *Max Capacity / Front Axle 3,500 lbs. (1,588 kg)
• *Max Capacity / Rear Axle 3,500 lbs. (1,588 kg)
• A - Overall Width 112" (2,849 mm)
• B - Overall Length 242" (6,139 mm)
• C - Height of Columns 161" (4,093 mm)
• D - Drive-thru Clearance 87" (2,201 mm)
• E - Maximum Rise 139.5" (3,544 mm)
• F - Maximum Lifting Height 144" (3,6​67 mm)
• G - Distance Between Columns 100" (2,546 mm)
• H - Runway Width 19" (482 mm)
• I - Width Between Runways 44" (1,121 mm)
• J - Runway Length 188.5" (4,786 mm)
• Min. Wheelbase @ rated Capacity¹ 135" (3,429 mm)
• Min. Wheelbase @ 75% Capacity¹ 115" (2,921 mm)
• Min. Wheelbase @ 50% Capacity¹ 95" (2,413 mm)
• Min. Wheelbase @ 25% Capacity¹ 80" (2,032 mm)
• Locking Positions 31
• Locking Spacing Every 4" (102 mm)
• Lifting Time to Max. Rise 90 seconds
• Lifting Time to Max. Rise 90 seconds

• Bottom Platform

• Lifting Capacity* 9,000 lbs. (4,082 kg)
• *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
• *Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
• Min. Wheelbase @ rated Capacity¹ 125" (3,175 mm)
• Min. Wheelbase @ 75% Capacity¹ 110" (2,​794 mm)
• Min. Wheelbase @ 50% Capacity¹ 90" (2,​289 mm)
• Min. Wheelbase @ 25% Capacity¹ 7​5" (1,​905 mm)
• Locking Positions 13
• Locking Spacing Every 4" (102 mm)
• Lifting Time to Max. Rise 50 seconds
• Motor 220 VAC / 60 Hz / 1 Ph

¹The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is because the wheels of such a vehicle are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of 95" is 50 percent of the Lift’s rated capacity (or 3,500 lbs. when the rated capacity is 7,000 lbs.).

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

FAQ & Support

Free Shipping in the 48 contiguous states to Commercial addresses that do not require a lift gate or fork lift. If the lift needs to be delivered to a residential address, you will be invoiced for the additional freight fees for residential and lift gate / fork lift service. 

Concrete Slab Requirements

User Manual

HD-973P Specs

BendPak Warranty

Installation and Operation Manual

1 Awesome Lift

This item is dropshipped from BendPak in California. Shipping will be calculated at checkout for most addresses. If you cannot get a shipping quote, please reach out to support for a quote.

ETA Information: