Bilt Hamber Re-View

New
Size
$29.70 USD
$29.70 USD
123 in stock
    Shipping Information

    This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs are calculated at checkout.

    BH-re-view

    Glass Polish

    • Glass Polish: Get Ultra Clean Glass before coating
    • No Polisher Needed: Apply by hand or with a machine
    • Perfect Protection Prep: Get your glass ready to be protected with sealants or coatings

    Re-View is an active glass polish that strips any glass-contaminating films, water repellent coatings, hard water marks, and mineral staining. But the really cool thing is Re-View works even when applied by hand. Of course, I'll always use a machine with a microfiber pad, but if you don't have one, this is super legit!

    You’ll want to use this before coating the windshield in the polishing phase. I will warn you that this stuff gets hot, so if you’re polishing with a machine, make sure you mist it with some water occasionally. Also, make sure you do a test spot before committing to the whole windshield.

    What You Get

    x1 - Bilt Hamber Re-View

    Specifications

    • Active glass polish for removing films, coatings, and mineral stains
    • Works by hand or machine
    • Pea-sized amount covers ~30 cmÂČ
    • Safe for untreated glass only
    • Store in cool, dry conditions

    Support Articles

    Manufactures Description

    RE-VIEW is a powerful active polish, it effectively strips any glass contaminating films, water repellent coatings, hard water marks and mineral staining. Unlike other glass polishes RE-VIEW will remove these films even when used by hand. Machine use is also possible.

    How To Use

    Treat only cool glass surfaces, out of direct sunlight. Clean glass of loose particulate dirt.

    For every 30cm square of glass use approximately one pea-sized amount applied by a damp, soft cotton cloth or suede microfibre, work well into glass using small circular motions.

    Mist lightly with water occasionally if machine polishing or if treating larger areas of glass.

    Residue may be rinsed when still wet, or buffed easily away with a dry microfibre cloth once FULLY dried.

    Test that glass does not repel water on completion by atomising water onto the cleaned area. Fully cleaned and decontaminated glass will show a flat uniform film of water. Wipe dry after test.

    Precautions:
    Apply only on glass surfaces. Do not use on aftermarket or plastic tinted windows. Test at small scale on unusual glass finishes. Do not use on textured glass.

    Store in cool conditions

    Obsessed Garage On Socials

    Want 10% off and free shipping?
    Join our membership program.

    Join Now