We can’t talk about an amazing sprayer and wand kit without adding in a foam cannon for your pressure washer. Whether you are a professional car detailer or a weekend warrior, this will be an accessory you’ll want in your setup. 

There are two types of people in the car detailing industry. Some who prefer to foam their cars with a foam gun, and others, like myself, who want to use a foam cannon. What differentiates the two is the foam gun only requires a water hose and doesn’t require a pressure washer, but it won’t produce enough pressure to create thick foam. If you want to get thick, shaving-cream-like foam,  you’ll need a pressure washer and you’ll want this kit which includes a foam cannon. This kit paired with GSF will give you the results you see in my videos. 

If you’re expecting your OE Sprayer to work well with a foam cannon, think again. I’ve seen far too many videos on social media where some guy is connecting his 3lb foam cannon to the end of a 40” wand. It’s absurd. Don’t do that. What you want is a short sprayer to connect your foam cannon to. This allows you to control everything so much better and make adjustments while you’re foaming. 

I made sure that all of the spray guns we sell are able to accept a foam cannon. Whether you’re looking to go basic with the MTM SGS-28, advanced with the Original Mosmatic Sprayer, or really ball out and go with the ultimate kit that has the OG Spec Mosmatic Sprayer, you can be sure that each gun is compatible with the foam cannons I offer. Check out the “What You Get” tab to see what comes in each kit.

When looking for aftermarket sprayers, I came across the MTM SG-28. It was a great sprayer that I enjoyed but it had limitations to it. I can tell you that I had many moments of frustration while washing my cars where the hose would get tangled and I would yank the darn thing in anger. 

So, because of this, I reached out to MTM and had them make the SGS-28; a well-built, swiveling sprayer that was based on the SG-28, but has all stainless steel internals. The reason why you want a swiveling sprayer is because it alleviates the issue of the pressure washer hose getting tangled and twisted.

Now, if you’re looking to step it up a notch, you’ll want to look at the Original Mosmatic Sprayer. Like the MTM SGS-28, the Original Mosmatic Sprayer has a swivel. The difference is that the swivel on the advanced sprayer is made by Mosmatic and is of much higher quality - it swivels much smoother. The trigger mechanism is also a lot more stout, yet requires very little effort to engage. I still install PRIMA fittings on the Original Mosmatic Sprayer to help keep costs down. MTM = Chinese-made / PRIMA = US MADE / Mid-Range. Mosmatic = Swiss-made / extremely high quality.

We arrive at the highest level of quality and that’s the OG Spec Mosmatic Swiveling Sprayer. This is my pride and joy. Lots of money and time went into developing this sprayer. This piece uses all the best connections and hardware available in the market. It also swivels but the swivel and QD (quick disconnect) is built into the handle reducing the bulk on the inlet of the sprayer, making it much more ergonomic. Once you get this thing in your hand, you’ll wonder why you didn’t get it sooner. 

This kit isn’t complete without the wand. I have two options: the Original Mosmatic Stainless Steel Wand that comes in the basic and advanced kits and the OG Spec Mosmatic Stainless Steel Wand that comes in the ultimate kit. These wands both have a 20° bend in them to make rinsing the roof or the lower portions of your car easier. The notable differences between these two are the fittings and the rubber nozzle protector. The Original Mosmatic Wand uses MTM fittings and has a nozzle protector installed on the wand already. The OG Spec Wand uses Mosmatic fittings and has no nozzle protector. This is because the nozzles that come in the Ultimate Kit have the protector. 

Nozzles are also an important part of your pressure washer accessories and need to be upgraded. The nozzles that come with the pressure washer are prioritizing pressure over flow. For washing cars, flow is king. The nozzles I provide are some of the best out there. In the basic and advanced kits, you get a 4-pack of stainless steel nozzles from MTM. In the ultimate kit, you get the OG Spec Mosmatic Nozzle Assembly. 

All in all, you’re getting three high-end products along with quality fittings that will give you the best user experience and allow you to foam your car.

FAQ & Support

This kit comes with a swiveling sprayer, wand, and nozzles to upgrade your pressure washer accessories. We also include two spare o-rings, one for your ¼” coupler and one for your ⅜” coupler.

Tier:
Ultimate Kit
- OG Spec Mosmatic Swiveling Sprayer w/ Mosmatic T304 Stainless Steel QDs
- OG Spec Mosmatic Wand w/ Mosmatic T304 Stainless Steel QDs
- Mosmatic Stainless Steel Nozzle Assembly - 40-degree and 25-degree
- Girots BOSS Foam Cannon and Mosmatic T304 Stainless Steel ¼” Male QD Plug

Advanced Kit
- Original Mosmatic Swiveling Sprayer w/ PRIMA Stainless Steel QDs
- Original Mosmatic Wand w/ PRIMA Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack
- Girots BOSS Foam Cannon and PRIMA Stainless Steel ¼” Male QD Plug

Basic Kit
- MTM SGS-28 Swiveling Sprayer w/ MTM Stainless Steel QDs
- Original Mosmatic Wand w/ MTM Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack
- MTM Original Foam Cannon and MTM Stainless Steel ¼” Male QD Plug


Nozzle Orifice Size:
See Chart in Pictures


Do you need a QD Coupler to attach the sprayer to a hose?
Yes. I need one for my OE hose.
- Basic/Advanced includes x1 MTM Stainless Steel M22 Male (15mm) to ⅜” QD Coupler
- Ultimate includes x1 Mosmatic T304 Stainless Stainless Steel M22 Male (15mm) to ⅜” QD Coupler

No.
- Select this option if you already have a coupler for the hose that matches your tier selection. No hose coupler will be included.


If you need a new hose to attach the sprayer to, you want to get one of our Accessory Packages that will include everything you need.
- Greenworks Portable Accessory Package

If you need to attach the sprayer to a High-Pressure Hose, you will need to purchase a coupler that matches your tier selection separately.
- Basic/Advanced - MTM Stainless Steel ⅜” Female QD Coupler
- Ultimate - Mosmatic T304 SS ⅜” Female QD Coupler


Specifications

MTM SGS-28 Swiveling Sprayer with Quick Disconnects (Basic)
- MTM Stainless Steel Quick Disconnects
- MTM swivel on the inlet of the sprayer
- Easy Pull Trigger
- Max Temp: 320 °F (160 °C)
- Max Pressure: 4060 PSI (28 MPa)
- Max Flow: 12 GPM (45 L/min)
- Made in Italy
- Warranty: 60 days, for manufacturing defects. (This does not include o-rings)

Original Mosmatic Swiveling Sprayer w/ QDs (Advanced)
- PRIMA Stainless Steel Quick Disconnects
- Mosmatic swivel on the inlet of the sprayer
- Low Trigger Force Trigger
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects

OG Spec Mosmatic Swiveling Sprayer (Ultimate)
- T304 Stainless Steel Quick Disconnects
- Mosmatic swivel integrated into the sprayer handle
- Low Trigger Force Trigger
- Custom blue faceplate with Obsessed Garage logo
- Max Tempurature: 300 °F (150 °C)
- Max Pressure: 5,000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Original Mosmatic Wand with Quick Disconnects (Basic/Advanced)
- 20° Bend
- MTM Stainless Steel Quick Disconnects
- Protective Rubber Guard
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects
- MTM fittings Warranty: 60 Days, for manufacturing defects. (This does not include o-rings)

OG Spec Mosmatic Wand (Ultimate)
- 20° Bend
- T304 Stainless Steel Quick Disconnects
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Stainless Steel 1/4" Nozzle 4 Pack
- Stainless Steel
- ¼” QD Plug Connection
- Warranty: 60 days, for manufacturing defects

OG Spec Mosmatic Nozzle Assembly
- T304 Stainless Steel
- ¼” QD Plug Connection
- Rubber Nozzle Guard
- Warranty: 6 months, for manufacturing defects

Griot's Garage The Boss Foam Cannon
- Precision Machined Stainless Steel Manifold
- Wide-Mouth 1 Liter Bottle
- Patented Vented Cap
- EPDM Seals
- Flexible, Weighted Suction Tube made from Silicone
- Sure-Flow Metering Pick-Up Ball with Changeable Metering Tips
- Adjustable Nozzle (0° - 40°)
- Min Pressure: 1,100 PSI - Max Pressure: 5,000 PSI
- Min Flow: 1.8 GPM
- Warranty: Lifetime through Griot's Garage *Exclusions apply

This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs calculated at checkout.

ETA Information: