Kranzle has discontinued the wall-mounted pressure washer that I had in my old wash bay. They have simplified their line and currently don't have a stainless steel cover available. I think of this pressure washer as our high-end custom install solution to be used with either a hose reel or boom pole.
This new version is wall mountable or may be placed on the ground. Another thing to note is these are designed to run for 30 seconds before shutting off to protect both the pump and electronics as they draw quite a bit of current.
For washing cars, you'll want to reduce the pressure by adjusting the size of the orifice on the spray nozzle at the end of your wand/gun. I would suggest you use a 7.0 sized nozzle that would reduce the pressure down to about 1200PSI.
I am a fully authorized Kranzle dealer and can get you the other models if this isn't the right one for you.
- Rated Flow: 3.3 GPM
- Rated Pressure: 2400 PSI
- 3 Piston Wobble Plate Pump
- Auto-start/stop with 30 second time-delay
- Power Cord
- 33’ ¼” Wire Braided High-Pressure Hose
- Electrical Requirements: 220 V, 25 A, single-phase
- Inlet: ¾” Female GHT
- Outlet: M22 Male (14mm)
- Dimensions: 31” W x 14” D x 28” H
- Weight: 187 LBS
FAQ & Support