I hear about many entry-level pressure washers claiming crazy high outputs and specs, but when tested, they don't come anywhere near what they advertise. Not the case with this unit. When the Active 2.0 showed up, it exceeded my expectations in regards to performance. This unit was easily my favorite pressure washer to test next to the Kranzle.

It does 2.0+ GPM at around 700 PSI, which is 1) insane and 2) exactly what we want for car washing. One of the requirements I had before selling this unit was no OE accessories were allowed. I expressed that to James at Active, and he and his team complied. We don’t want or need it. That’s the reason we were able to create this end-to-end solution that will not only improve your experience but also give you quality parts and pieces you can transfer over to a premium pressure washer one day when this thing dies out or when you’re ready to upgrade. 

Outside of the design change, which is fantastic, the pump on the Active 2.0 has been completely reengineered. The objective when these guys were building this thing was longevity. Most of these other cheap pressure washers on the market (Greenworks, Ryobi, SunJoes) have a lifespan of 100 hours; James and his team set out to increase that lifespan to 200-250 hours. This revamp required some upgrades of the internal components to achieve the outcome they set out to accomplish. 

This unit has 5-plunger tech where it’s still radial-axial with a wobble plate. The wobble plate is connected to the drive shaft to push pistons back and forth, creating suction and then pushing water out—the amazingness in the Active 2.0 is that it delivers high pressure with a greater amount of water.

I think this is the perfect portable solution for anyone who wants a high-performing pressure washer that won’t break the bank. I will always suggest that you wall mount your unit, but if you’re someone who likes to move around freely with your pressure washer or you just can’t wall mount it, this is the solution you want. 

Remember, this is still an entry-level pressure washer and is not serviceable. Despite that, it performs well and will likely give you twice the life and way better output than you’d get with any other budget unit.

Tier:

Ultimate
- Active 2.0 Pressure Washer
- Inlet Hose w/ Stainless Steel Garden Hose QDs
- 50’ High-Pressure Hose w/ Mosmatic T304 Stainless Steel ⅜” Female QD Couplers and Mosmatic T304 M22 Female (14mm) to ⅜” QD Plug
- OG Spec Mosmatic Swiveling Sprayer w/ Mosmatic T304 Stainless Steel QDs
- OG Spec Mosmatic Wand w/ Mosmatic T304 Stainless Steel QDs
- Mosmatic Stainless Steel Nozzle Assembly w/ 5.0 Orifice - 40-degree and 25-degree
- Griot's Garage The Boss Foam Cannon w/ 1.25mm Orifice (and extra 1.5mm orifice) and Mosmatic T304 Stainless Steel ¼” Male QD Plug

Advanced
- Active 2.0 Pressure Washer
- Inlet Hose w/ Stainless Steel Garden Hose QDs
- 50’ High-Pressure Hose w/ PRIMA Stainless Steel 3/8" Female QD Couplers and M22 Female (14mm) to 3/8" QD Plug
- Original Mosmatic Swiveling Sprayer w/ PRIMA Stainless Steel QDs
- Original Mosmatic Wand w/ MTM Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack - 5.0 Orifice
- Griot's Garage The Boss Foam Cannon w/ 1.25mm Orifice (and extra 1.5mm orifice) and PRIMA Stainless Steel ¼” Male QD Plug

Basic
- Active 2.0 Pressure Washer
- Inlet Hose w/ Brass Garden Hose QDs
- 50’ High-Pressure Hose w/ MTM Stainless Steel 3/8" Female QD Couplers and M22 Female (14mm) to 3/8" QD Plug
- MTM SGS-28 Swiveling Sprayer w/ MTM Stainless Steel QDs
- Original Mosmatic Wand w/ MTM Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack - 5.0 Orifice
- MTM Original Foam Cannon w/ 1.25mm Orifice (and extra 1.5mm orifice) and MTM Stainless Steel ¼” Male QD Plug

Inlet Hose Length:
- 6.5’
- 12’
- 20’

Pressure Washer:

Active 2.0
- 5 Piston Radial Axial Pump
- Tested Flow: 2.09 GPM
- Tested Pressure: 700 PSI
- Tested Amperage: 11.9 A with Nozzle, 14.1 A with Foam Cannon
- 35’ Power Cord with GFCI
- Warranty: 2-year, Comprehensive

Sprayers:

Ultimate - OG Spec Mosmatic Swiveling Sprayer
- T304 Stainless Steel Quick Disconnects
- Mosmatic swivel integrated into the sprayer handle
- Low Trigger Force Trigger
- Custom blue faceplate with Obsessed Garage logo
- Max Tempurature: 300 °F (150 °C)
- Max Pressure: 5,000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Advanced - Original Mosmatic Swiveling Sprayer w/ QDs
- PRIMA Stainless Steel Quick Disconnects
- Mosmatic swivel on the inlet of the sprayer
- Low Trigger Force Trigger
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects
- MTM fittings Warranty: 60 Days, for manufacturing defects. (This does not include o-rings)

Basic - MTM SGS-28 Swiveling Sprayer with Quick Disconnects
- MTM Stainless Steel Quick Disconnects
- MTM swivel on the inlet of the sprayer
- Easy Pull Trigger
- Max Temp: 320 °F (160 °C)
- Max Pressure: 4060 PSI (28 MPa)
- Max Flow: 12 GPM (45 L/min)
- Made in Italy
- Warranty: 60 days, for manufacturing defects. (This does not include o-rings)

Wands:

Ultimate - OG Spec Mosmatic 20° Bent Wand
- 20° Bend
- Made in Switzerland
- T304 Stainless Steel Quick Disconnects
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Advanced/Basic - Original Mosmatic Swiveling Sprayer w/ QDs
- MTM Stainless Steel Quick Disconnects
- Mosmatic swivel on the inlet of the sprayer
- Low Trigger Force Trigger
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects
- MTM fittings Warranty: 60 Days, for manufacturing defects. (This does not include o-rings)

Nozzles:

Ultimate - OG Spec Mosmatic Nozzle Assembly
- T304 Stainless Steel
- ¼” QD Plug Connection
- Rubber Nozzle Guard
- Warranty: 6 months, for manufacturing defects

Advanced/Basic - Stainless Steel 1/4" Nozzle 4 Pack
- Stainless Steel
- ¼” QD Plug Connection
- Warranty: 60 days, for manufacturing defects

Foam Cannons:

Ultimate/Advanced - Griot's Garage The Boss Foam Cannon
- Precision Machined Stainless Steel Manifold
- Wide-Mouth 1 Liter Bottle
- Patented Vented Cap
- EPDM Seals
- Flexible, Weighted Suction Tube made from Silicone
- Sure-Flow Metering Pick-Up Ball with Changeable Metering Tips
- Adjustable Nozzle (0° - 40°)
- Min Pressure: 1,100 PSI - Max Pressure: 5,000 PSI
- Min Flow: 1.8 GPM
- Warranty: Lifetime through Griot's Garage *Exclusions apply

Basic - MTM Original Foam Cannon
- Brass Foam Cannon Body
- Adjustable spray pattern
- 32oz Bottle
- ¼” QD Plug Connection
- Min Pressure: 1,100 PSI - Max Pressure: 5,000 PSI
- Min Flow: 1.4 GPM - Max Flow: 5.3 GPM
- Max Temperature: 140°F
- Made in Italy
- Warranty: 60 days, for manufacturing defects

High-Pressure Hose:

Ultimate/Advanced/Basic - High-Pressure 3/8" Pressure Washer Hose
- ⅜” Inside Diameter
- ⅝” Outside Diameter
- Ends terminated in ⅜” Male NPT
- Single Wire Construction
- Smooth Jacket in Non-marking Blue
- Rubber Bend Restrictors
- Max Pressure: 4000 PSI
- Max Temperature: 275 °F
- Warranty: 60 days, for manufacturing defects

Inlet Hose:

Garden Hose
- Brand: Continental
- ⅝” Inside Diameter
- Ends terminated in ¾” GHT

Fittings:

Ultimate - Mosmatic T304 SS 3/8" Female QD Coupler
- Brand: Mosmatic
- Material: T304 Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Coupler
- Warranty: 6 months, for manufacturing defects (does not include o-rings).

Advanced/Basic - Stainless Steel 3/8" Female QD Coupler
- Brand: MTM
- Material: Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Coupler
- Warranty: 60 days, for manufacturing defects (does not include o-rings).

Ultimate/Advanced/Basic - Stainless Steel M22 Female (15mm) to 3/8" QD Plug
- Brand: MTM
- Material: Stainless Steel
- Inlet: M22 Female (15mm)
- Outlet: ⅜” QD Plug
- Warranty: 60 days, for manufacturing defects.

Ultimate/Advanced - Stainless Steel Garden Hose 3/4” Female QD Coupler
- Brand: MTM
- Material: Stainless Steel
- Inlet: ¾” Female GHT
- Outlet: ¾” QD Coupler
- Warranty: 60 days, for manufacturing defects.

Ultimate/Advanced - Stainless Steel Garden Hose 3/4” Male QD Plug
- Brand: MTM
- Material: Stainless Steel
- Inlet: ¾” Male GHT
- Outlet: ¾” QD Plug
- Warranty: 60 days, for manufacturing defects.

Basic - Brass Garden Hose 3/4” Female QD Coupler
- Brand: MTM
- Material: Brass
- Inlet: ¾” Female GHT
- Outlet: ¾” QD Coupler
- Warranty: 60 days, for manufacturing defects.

Basic - Brass Garden Hose 3/4” Male QD Plug
- Brand: MTM
- Material: Brass
- Inlet: ¾” Male GHT
- Outlet: ¾” QD Plug
- Warranty: 60 days, for manufacturing defects.

This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs calculated at checkout.

This will ship from OGHQ. Shipping is calculated at checkout.

ETA Information: