Putting a ceramic coating on a paint protection film is something I probably would have never done if it wasn't for Billy at Presidential Detailing. HALO has been working quite well on my 991.2 GT3 RS and I'm happy with it. Gtechniq HALO is engineered to be a flexible film that will chemically bond to your paint protection film making it a permanent surface on the PPF or vinyl. The main benefit I like from HALO is that it helps reduce the yellowing of PPF and if you have a catless exhaust, it will also slightly help with yellowing of the PPF from the exhaust.
There can be significant cons that are often overlooked when dealing with a coating:
- Not as easily installed
- Very difficult to remove if you installed it incorrectly or don't want it on the PPF any longer
- More susceptible to mineral deposit or water spots
- Lasts longer than waxes or sealants, but may not look as good
- Generally requires more detailed maintenance to keep looking proper
Picking a coating is not as cut and dry as you might think. It wasn't an easy decision for me to decide what coatings I wanted to offer, especially now that I've decided to sell the PPF coating I have on my GT3 RS. Gtechniq CSL and EXOv4 have been excellent coatings, so testing and selling HALO is a no brainer since I've started doing PPF on most of my GT cars.
Above I attached a video from my friend Billy at Presidential Detailing, they go over the whole process of coating the PFF with Gtehcniq HALO. Billy does a good job of explaining how to correctly apply HALO. I suggest you watch the whole video before you try and take this task on yourself.
HALO enhances the performance of Paint Protection Film (PPF) and vinyl. It’s a chemically bonding, ultra-dense flexible film that becomes the permanent surface of the film – protecting it from the elements a car faces on a daily basis.
The density of the coating and its low surface energy improve dirt and water repellency of PPF or vinyl. It also helps to prevent staining from dirt ingression, as well as reducing yellowing caused by UV rays.
Overall, HALO keeps the PPF looking in a much better condition and makes it much easier for people to keep their car clean following PPF/ vinyl application.
Rigorous real-world and laboratory testing has proven HALO to be compatible with all types of gloss, matte, and satin vinyl and PPF. It is also proven to work on self-healing films.
What's in the box?:
- 30ml Bottle: This will do at least 2 car the way that I use it. You don't want to have a bunch of extra. The product won't last forever once you open it. The bottle has a built-in fluid dripper like EXOv4.
- Applicator: This one works, but I would suggest getting the Cquartz suede applicators I have in the store along with a CarPro applicator block.
- HALO can be used on gloss, satin, or matte finishes.
- Wipe the PPF down with CarPro Eraser or Gtechniq Panel Wipe.
- I have 2 of my 240GSM Lime Green Coating Removal Towels ready. One will be for an initial wipe and other for final wipe.
- Prime the Cquartz Suede Applicator on an Applicator Block.
- You don't need to use a ton of product. Just a few drops per 2' x 2' section. I apply in a cross hatch pattern.
- I'd do about two sections, then wipe off one, do another, wipe off the previous, repeat...
- HALO can have two coats applied for the best results, but one is also fine.
- Let cure for at least 12 hours, preferably overnight.
- After the first wash, use Bead Maker as your drying aid, and you'll be good to go.