Sun Joe SPX6001C Upgrade Package


  

The SPX6001C-XR "Bucket Joe" was finally tested in the Pressure Washing Project. I can see this pressure washer being useful for people without access to a hose or spigot for water.

Unfortunately, the specs are pretty weak and it's not suitable for using a foam cannon (not even the supplied one). This would be good for a quick wash and rinse or you could possibly use it with ONR. You can only upgrade the hose on this and use an aftermarket sprayer like our Mosmatic or MTM solutions. I found a 2.0 orifice tip to be best with this model but the included 40 degree isn't bad for PSI.

You'll have two options:

Quick disconnect package:

  • M22 (15MM) MALE TO 3/8" BRASS COUPLER

  • M22 (15MM) FEMALE TO 3/8" PLUG

Kobrajet/Gun Upgrade:

  • Kobrajet Hose (25' or 50')
  • 3/8” FEMALE STAINLESS QUICK DISCONNECT COUPLER (2)

  • M22 (15MM) FEMALE TO 3/8" PLUG

  • MOSMATIC HIGH PRESSURE SPRAYER/MTM SGS-28/MTM SG-28

  • MOSMATIC STAINLESS STEEL 20" BENT WAND

  • MTM NOZZLE 4 PACK (2.0 Orifice) - 1/4" STAINLESS 

 

Note:  QUICK DISCONNECTS DON'T HAVE A PUBLISHED WARRANTY.  These are wear and tear items.  All QDs are available a la carte here.  I would recommend having some back-ups for when they wear out.