Audio Control Subwoofer Amp
SKU: DA-78000690
In order to amplify the sound of your subwoofer, you’re going to need an amplifier that can deliver constant power at all impedances. This is where the Audio Control RS Series amps come into the picture.
Dynaudio has a partnership with Audio Control, where Audio Control makes the subwoofer amplifiers for them. I’m selling both the RS 500 and the RS 1000. The 500 will be for one subwoofer, while the 1000 will be for two.
As you can see or as you will see, these amps are on the clunky side because they were designed for custom-install applications. So, whether you decide to do a rack mount or just put them on a shelf, know that one install will look much cleaner than the other.
Once you tune these, you can set it and forget it. It’s pretty straightforward to do. You’ll be provided with an IP address in the manual that allows you to connect to your network to make tuning adjustments. If you’re a tinkerer, you should be fine doing this yourself.
These are extremely capable, high-output amplifiers rated to have more wattage than the Dynaudio subs, but they were made specifically for the Dynaudio Sub line.
You wouldn’t need both of these - you’d pick one or the other depending on how many subs you’re going to have. A real simple formula: 1 Sub = RS500. 2 Subs = RS1000.
If you have questions on setting these up, just hit up Kyle and his team at design@obsessedgarage.com. They will be the ones that can put together your custom install solution.
Features and Specifications
RS 500
- 500 Watts at 8/4/2 Ohms
- Digital Signal Processing (DSP) Performance
- Six-band Graphic EQ
- Eight-band Parametric EQ
- Crossover with Subsonic Filter
- Built-In Speaker Optimization Profiles
- Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
- Network Programmable Graphic & Parametric Equalization with User Memories
- Digital Signal Sense
- AudioControl LightDrive Anti-Clipping Speaker Protection
- Balanced Inputs/Thru
- Unbalanced Input/Thru
- LFE Input/Thru
- Speaker Level Inputs
- Home and Commercial Installations
Inputs
- Audio Inputs: 1 Balanced, 2 Unbalanced, 1 LFE, 2 Speaker Level
- Nominal sensitivity: 0.5V to 4V (user selectable)
- Signal to Noise (A-wtd ref full output): 98 dB
- Frequency Response: 15 Hz – 350 Hz
Outputs
- Amplifier Channels: 1
- Continuous power output: 500W
- Minimum Speaker Load: 2Ω
- Loop/Thru Audio Outputs: 1 Balanced, 2 Unbalanced, 1 LFE
- Total Harmonic Distortion: 0.1%
Control
- Remote Power Trigger: +12 VDC or Dry Contact Closure
- Network Connection/Protocol: 10BaseT Ethernet TCP/IP
- Communication Protocol: HTTP or Telnet
- 12 Volt Trigger Outputs: 1
- IR Receiver Inputs: 1
Weights & Dimensions
- Dimensions (including terminals and feet): 17”W x 17.5”D x 1.75”H (1U)
- Weight: 14.9 lbs. (6.8 kg)
RS 1000
- 1000 Watts at 8/4/2 Ohms
- Digital Signal Processing (DSP) Performance
- Six-band Graphic EQ
- Eight-band Parametric EQ
- Crossover with Subsonic Filter
- Built-In Speaker Optimization Profiles
- Ethernet Port for Status Monitoring, Source Switching, and 12 Volt Trigger Control
- Network Programmable Graphic & Parametric Equalization with User Memories
- Digital Signal Sense
- AudioControl LightDrive Anti-Clipping Speaker Protection
- Balanced Inputs/Thru
- Unbalanced Input/Thru
- LFE Input/Thru
- Speaker Level Inputs
- Home and Commercial Installations
Inputs
- Audio Inputs: 1 Balanced, 2 Unbalanced, 1 LFE, 2 Speaker Level
- Nominal sensitivity: 0.5V to 4V (user selectable)
- Signal to Noise (A-wtd ref full output): 95 dB
- Frequency Response: 20 Hz – 350 Hz
Outputs
- Amplifier Channels: 1
- Continuous power output: 1000W
- Minimum Speaker Load: 2Ω
- Loop/Thru Audio Outputs: 1 Balanced, 2 Unbalanced, 1 LFE
- Total Harmonic Distortion: 0.1%
Control
- Remote Power Trigger: +12 VDC or Dry Contact Closure
- Network Connection/Protocol: 10BaseT Ethernet TCP/IP
- Communication Protocol: HTTP or Telnet
- 12 Volt Trigger Outputs: 1
- IR Receiver Inputs: 1
Weights & Dimensions
- Dimensions (including terminals and feet): 17”W x 17.5”D x 3.5”H (2U)
- Weight: 17.0 lbs. (7.7 kg)
Shipping & Returns
The Audio Control Subwoofer Amp is fulfilled as available, so shipments might be delayed.
NAD products are subject to a 15% restocking fee.
This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs calculated at checkout.
ETA Information:
Complete Your Arsenal