Advanced - Sprayer/Wand/Foam Cannon Upgrade Kit - Shop By Nozzle Orifice

Skip to product information
1 of 2
Nozzle Orifice
Do you need a QD Coupler to attach the sprayer to a hose?
Regular price $335.63 USD
Sale price $335.63 USD Regular price
Low stock! Only 3 left

    Shipping Information

    This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs are calculated at checkout.

    PK080206

    We can’t talk about an amazing sprayer and wand kit without adding in a foam cannon for your pressure washer. Whether you are a professional car detailer or a weekend warrior, this will be an accessory you’ll want in your setup. 

    There are two types of people in the car detailing industry. Some who prefer to foam their cars with a foam gun and others like myself who want to use a foam cannon. What differentiates the two is that the foam gun only requires a water hose and doesn’t require a pressure washer. Because of this, it won’t produce enough pressure to create thick foam. If you want to get thick, shaving-cream-like foam, you’ll need a pressure washer, and you’ll want this kit, which includes a foam cannon. This kit, paired with GSF, will give you the results you see in my videos

    If you’re expecting your OE Sprayer to work well with a foam cannon, think again. I’ve seen far too many videos on social media where some guy is connecting his 3lb foam cannon to the end of a 40” wand. It’s absurd. Don’t do that. What you want is a short sprayer to connect your foam cannon to. This allows you to control everything so much better and make adjustments while you’re foaming. 

    I made sure that all of the spray guns we sell can accept a foam cannon. Whichever kit you go with (basic, advanced, or ultimate), you can be sure that each gun is compatible with the foam cannons I offer.

    Here, you can shop based on the specs of the pressure washer you are looking to upgrade. Check out the nozzle chart to decide what spec you need. It may look a little confusing, but it is rather easy. The top row indicates the gallons per minute (GPM) that your machine is rated for. The PSI on the side is what you want your PSI to be. So, if you had a machine that is rated for 1.7 GPM and want it to put out 1000 PSI (that is the pressure we recommend for car washing), then you would need a 3.5. Do not use nozzles smaller than what your machine comes with (unless it explicitly says you can), as this will burn up the motor.

    x1 - Original Mosmatic Swiveling Sprayer w/ MTM PRIMA Stainless Steel QDs
    x1 - Original Mosmatic Wand w/ MTM PRIMA Stainless Steel QDs
    x1 - MTM Stainless Steel ¼” Nozzle 4 Pack
    x1 - Griot's Boss Foam Cannon

    Optional Add-On: QD Coupler to attach sprayer to hose
    x1 - MTM Stainless Steel M22 Male (14mm) to ⅜” QD Coupler

    • Sprayer: Original Mosmatic swiveling sprayer with PRIMA stainless QDs, low-trigger force, rated up to 5,000 PSI and 300 °F
    • Wand: Original Mosmatic stainless steel 20° bent wand with PRIMA stainless QDs, rated to 5,000 PSI and 300 °F
    • Nozzles: MTM stainless steel ¼″ nozzle 4-pack
    • Foam Cannon: Griot’s Garage “Boss” with PRIMA stainless ¼″ male QD plug
    • Warranty: 6‑month coverage on Mosmatic sprayer, wand, and PRIMA fittings

    Want 10% off and free shipping?
    Join our membership program.