Active VE52/VE56 Wall Mount Solution

Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution
Active VE52/VE56 Wall Mount Solution

Active VE52/VE56 Wall Mount Solution

  • For ETA See Reserve Your Spot Info Below
Tier
Hose Reel Color
Regular price $1,432.78
/

I didn’t want to leave out the newest addition to our pressure washer lineup. The Active VE52 Wall Mount Solution is what I would label as an entry level kit. Entry level in the sense that it comes with a cheap yet practical pressure washer. This kit is derived from my custom install but removes the CR Spotless and piping kit. In this solution, you’ll have everything you need to wall mount your Active VE56 including the pressure washer. 

I hear about a lot of entry-level pressure washers claiming crazy high outputs and specs but when tested, don't come anywhere near what they advertise. When the VE52 showed up I thought for sure it was going to be like the rest. Much to my surprise, it did pretty great in the testing. 

This unit does 1.84 GPM at 1090 PSI with the stock gun and nozzles, however, we know that we’re not doing  a stock/OE setup here. With the OG upgrades we’re getting 1.94 GPM at 1030 PSI. What you’re going to pay to upgrade this kit and enhance your car washing experience is well worth the investment. Although this is a cheapo pressure washer, it doesn’t have to mean you also have cheapo accessories. We’ve designed this solution for you to get the best out of this unit.

Having a wall mount setup will change your life. I’ll never go back to a portable solution. Being able to set up everything in a matter of minutes makes the car washing experience so much more welcoming. From unwinding your hose from a Coxreel to filling your buckets with a bucket filler hose; there’s no simpler way of arranging your pressure washing tools. This is a no-brainer if saving time and staying organized is your objective.

I want to also mention looks. In my personal opinion, looks are just as important as functionality. Whenever I am constructing a new idea, I’m always keeping aesthetics at the forefront of my mind. Many of you who are purchasing this wall mount solution will want to ask someone in my Facebook Group to share their setup with you. I’ve brought us this far with my Kranzle K1322TS Custom Install Solution but others have taken the setup of these solutions so much farther. There are some pretty sick setups out there. 

What I really like about this revamp we’ve done with our pressure washing kits is that we’re giving you more options. You’ll have three tiers available to choose from. Basic, advanced, and ultimate. Each package comes with upgraded fittings (Brass or Stainless Steel), an upgraded sprayer/wand, a 75’ or 100’ High-Pressure hose, and either an original foam cannon or MTM’s latest PF22.2 foam cannon

You’ll see some similarities in these packages but the most obvious difference will be the sprayer, wand, and hose size you’re getting. I want to discuss all three of these products in greater detail to give you a sense of awesomeness you’ll be purchasing. 

The SGS-28 in our basic package is a well-built, swiveling sprayer that was based on the SG-28, but has all stainless steel internals. The reason why you want a swiveling sprayer is because it alleviates the issue of the pressure washer hose getting tangled and twisted.

The Original Mosmatic Sprayer in our advanced package has a swivel as well. The difference is that the swivel on the advanced sprayer is made by Mosmatic and is of much higher quality - it swivels much smoother. The trigger mechanism is also a lot more stout, yet requires very little effort to engage. I still install MTM fittings on the Original Mosmatic Sprayer to help keep costs down.

Finally, the OG Spec Mosmatic Swiveling Sprayer. This is my pride and joy. Lots of money and time went into developing this sprayer. This piece uses all the best connections and hardware available in the market. It also swivels but the swivel and QD (quick disconnect) is built into the handle, reducing the bulk on the inlet of the sprayer, making it much more ergonomic.

This kit isn’t complete without the wand. I have two options: the Original Mosmatic Stainless Steel Wand that comes in the basic and advanced kits and the OG Spec Mosmatic Stainless Steel Wand that comes in the ultimate kit. These wands both have a 20° bend in them to make rinsing the roof or the lower portions of your car easier. The notable differences between these two are the fittings and the rubber nozzle protector. The Original Mosmatic Wand uses MTM fittings and has a nozzle protector installed on the wand already. The OG Spec Wand uses Mosmatic fittings and has no nozzle protector. This is because the nozzles that come in the Ultimate Kit have the protector. 

Nozzles are also an important part of your pressure washer accessories and need to be upgraded. The nozzles that come with the pressure washer are prioritizing pressure over flow. For washing cars, flow is king. The nozzles I provide are some of the best out there. In the basic and advanced kits, you get a 4-pack of stainless steel nozzles from MTM. In the ultimate kit, you get the OG Spec Mosmatic Nozzle Assembly.

And last but not least, our pressure washer hoses. Depending on your selection (basic, advanced, or ultimate), you will also be getting either a 75’ or 100’ High-Pressure hose. The quality of these hoses are definitely legit. You’ve heard me talk about how I bought 6 different hoses when I built the wash bay at my old house. I did and I’m not going to apologize for it. 

The High-Pressure hose is a single wire hose that is much more pliable than the 2-wire hoses you’ll see out there. Plus, for car washing, we don’t need a 2-wire. It also has a smooth jacket that is good for when you want to avoid messing up your floor with marks. It’s the right hose for the right pressure washer. It’s just right.  

Please note: The stand-alone Active V52/VE56 Unit can not be sold or shipped to Canada due to manufacturer brand limitations.

FAQ & Support

Why Should I Upgrade My Sprayer and Which One Should I Get? - Upgrading Your Sprayer
How To: Get the most foam out of a foam cannon
PF22.2 Bottle Dimensions - In Photos

Pressure Washer Fittings 101: Fittings and QD Naming
Pressure Washer Fittings 102: Applications and Usage
Pressure Washer Fittings 103: Spray Nozzles

Why is my gun or wand (1/4" Coupler) leaking from the outlet?
Why is my 3/8" coupler leaking from the end?
Troubleshooting: Foam cannon is leaking / clogged / not foaming well.
What orifice nozzle is installed in my foam cannon?
Troubleshooting: Getting your foam cannon dialed in and getting the most out of it.

This solution comes with everything you need to use the Active VE52 in a wall-mount setup. It includes a swiveling sprayer, wand, nozzles, foam cannon, a high-pressure hose with a hose reel and a jumper hose, and an inlet hose to connect to water.

We also include two spare o-rings, one for your ¼” coupler and one for your ⅜” coupler.

Tier:
Ultimate Solution
- Active VE56 Pressure Washer
- 6.5’ Inlet Hose w/ Stainless Steel Garden Hose QDs
- M22 Female (15mm) to 3/8" NPT adapter
- Stainless Steel 3/8" NPT 90° Elbow
- Mosmatic T304 Stainless Steel 3/8" Male QD plug
- 3’ Jumper Hose w/ Mosmatic T304 Stainless Steel ⅜” Female QD Coupler
- Coxreels Hand Crank Hose Reel w/ Stainless Steel Swivel
- 100’ High-Pressure Hose w/ Mosmatic T304 Stainless Steel ⅜” Female QD Coupler
- OG Spec Mosmatic Swiveling Sprayer w/ Mosmatic T304 Stainless Steel QDs
- OG Spec Mosmatic Wand w/ Mosmatic T304 Stainless Steel QDs
- Mosmatic Stainless Steel Nozzle Assembly w/ 4.0 Orifice - 40-degree and 25-degree
- MTM PF22.2 Foam Cannon w/ 1.25mm Orifice and Mosmatic T304 Stainless Steel ¼” Male QD Plug

Advanced Solution
- Active VE56 Pressure Washer
- 6.5’ Inlet Hose w/ Stainless Steel Garden Hose QDs
- M22 Female (15mm) to 3/8" NPT adapter
- Stainless Steel 3/8" NPT 90° Elbow
- Stainless Steel 3/8" Male QD plug
- 3’ Jumper Hose w/ MTM Stainless Steel 3/8" Female QD Coupler
- Coxreels Hand Crank Hose Reel w/ Stainless Steel Swivel
- 100’ High-Pressure Hose w/ MTM Stainless Steel 3/8" Female QD Coupler
- Original Mosmatic Swiveling Sprayer w/ MTM Stainless Steel QDs
- Original Mosmatic Wand w/ MTM Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack - 4.0 Orifice
- MTM PF22.2 Foam Cannon w/ 1.25mm Orifice and MTM Stainless Steel ¼” Male QD Plug

Basic Solution
- Active VE56 Pressure Washer
- 6.5’ Inlet Hose w/ Brass Garden Hose QDs
- M22 Female (15mm) to 3/8" NPT adapter
- Stainless Steel 3/8" NPT 90° Elbow
- Stainless Steel 3/8" Male QD plug
- 3’ Jumper Hose w/ MTM Stainless Steel 3/8" Female QD Coupler
- Coxreels Hand Crank Hose Reel w/ Stainless Steel Swivel
- 75’ High-Pressure Hose w/ MTM Stainless Steel 3/8" Female QD Coupler
- MTM SGS-28 Swiveling Sprayer w/ MTM Stainless Steel QDs
- Original Mosmatic Wand w/ MTM Stainless Steel QDs
- MTM Stainless Steel ¼” Nozzle 4 Pack - 4.0 Orifice
- MTM Original Foam Cannon w/ 1.25mm Orifice and MTM Stainless Steel ¼” Male QD Plug


Hose Reel Color:
- Blue
- Black
- Gray


Specifications

Active VE56
- 5 Piston Radial Axial Pump
- Measured Flow: 1.84 GPM
- Measured Pressure: 1090 PSI
- Measured Amperage: 12.6 A with 3.7 Orifice Nozzle, 14.1 A with 1.25mm Orifice Foam Cannon
- 35’ Power Cord with GFCI
- Inlet: ¾” GHT Female
- Outlet: M22 Male (15mm)
- Dimensions: 22” W x 12” D x 12” H

ACTIVE WARRANTY
Two (2) Year Warranty
This product is guaranteed to be free from defects in material and workmanship for two years from the date of its original purchase. If such a defect appears during the warranty period, upon presentation of proof of purchase, Active Products will elect to either (1) replace the product or defective component at no charge and free shipping or (2) refund the full purchase price to the owner (at its discretion).

What is Not Covered?
The warranty is void if the equipment is used for commercial, rental or industrial purposes.

This warranty does not cover accidental damage, unreasonable use, and normal wear and tear like belts, chains and tine, use of improper detergents, freezing, neglect, or non-compliance with the operating Instructions. The warranty does not cover loss of use or other consequential damages arising from any of the above, nor does it cover repairs made or attempted by unauthorized persons.

Inlet/Garden Hose Upgrade Kit
Garden Hose
- Brand: Continental
- ⅝” Inside Diameter
- Ends terminated in ¾” GHT

Brass Garden Hose 3/4” Male QD Plug (Basic)
- Brand: MTM
- Material: Brass
- Inlet: ¾” Male GHT
- Outlet: ¾” QD Plug
- Warranty: 60 days, for manufacturing defects.

Brass Garden Hose 3/4” Female QD Coupler (Basic)
- Brand: MTM
- Material: Brass
- Inlet: ¾” Female GHT
- Outlet: ¾” QD Coupler
- Warranty: 60 days, for manufacturing defects.

Stainless Steel Garden Hose 3/4” Female QD Coupler (Advanced/Ultimate)
- Brand: MTM
- Material: Stainless Steel
- Inlet: ¾” Female GHT
- Outlet: ¾” QD Coupler
- Warranty: 60 days, for manufacturing defects.

Stainless Steel Garden Hose 3/4” Male QD Plug (Advanced/Ultimate)
- Brand: MTM
- Material: Stainless Steel
- Inlet: ¾” Male GHT
- Outlet: ¾” QD Plug
- Warranty: 60 days, for manufacturing defects.
Wall Mount Hose and Reel Upgrade Kit
M22 Female (15mm) to 3/8" Female NPT
- Material: Brass/Zinc
- Inlet: M22 Female (15mm)
- Outlet: ⅜” Female NPT

Stainless Steel 3/8" NPT 90° Elbow
- Brand: Coxreels
- Material: Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet ⅜” Female NPT
- Max Pressure: 3,000 PSI

Stainless Steel 3/8" Male QD Plug (Basic/Advanced)
- Brand: MTM
- Material: Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Plug
- Warranty: 60 days, for manufacturing defects.

Mosmatic T304 Stainless Steel 3/8" Male QD Plug (Ultimate)
- Brand: MTM
- Material: Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Plug
- Warranty: 6 months, for manufacturing defects.

Stainless Steel 3/8" Female QD Coupler (Basic/Advanced)
- Brand: MTM
- Material: Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Coupler
- Warranty: 60 days, for manufacturing defects (does not include o-rings).

Mosmatic T304 SS 3/8" Female QD Coupler (Ultimate)
- Brand: Mosmatic
- Material: T304 Stainless Steel
- Inlet: ⅜” Male NPT
- Outlet: ⅜” QD Coupler
- Warranty: 6 months, for manufacturing defects (does not include o-rings).

Jumper Hose
- ⅜” Inside Diameter
- ⅝” Outside Diameter
- Ends terminated in ⅜” Male NPT
- Single Wire Construction
- Smooth Jacket in Non-marking Blue
- Rubber Bend Restrictors
- Max Pressure: 4000 PSI
- Max Temperature: 275 °F
- Warranty: 60 days, for manufacturing defects

Coxreels Hand Crank Hose Reel with Stainless Steel Swivel
- Model #: CCR-1070
- Capacity: 100’ of ⅝” Outside Diameter Hose
- Stainless Steel Full Flow 90° Swivel
- Adjustable Tension Brake
- U-Shaped Frame
- ⅜” Female NPT Inlet
- ⅜” Female NPT Outlet
- Made in the USA
- Max Working Pressure: 4,000 PSI
- Overall Dimensions: W = 18.25” | L = 12” | H = 13”
- Base Dimensions: X = 9.5” | Y = 6”
- Mounting Pattern: M = 5.5” | N = 3”

High-Pressure 3/8" Pressure Washer Hose
- ⅜” Inside Diameter
- ⅝” Outside Diameter
- Ends terminated in ⅜” Male NPT
- Single Wire Construction
- Smooth Jacket in Non-marking Blue
- Rubber Bend Restrictors
- Max Pressure: 4000 PSI
- Max Temperature: 275 °F
- Warranty: 60 days, for manufacturing defects

Sprayer/Wand/Foam Cannon Upgrade Kit
MTM SGS-28 Swiveling Sprayer with Quick Disconnects (Basic)
- MTM Stainless Steel Quick Disconnects
- MTM swivel on the inlet of the sprayer
- Easy Pull Trigger
- Max Temp: 320 °F (160 °C)
- Max Pressure: 4060 PSI (28 MPa)
- Max Flow: 12 GPM (45 L/min)
- Made in Italy
- Warranty: 60 days, for manufacturing defects. (This does not include o-rings)

Original Mosmatic Swiveling Sprayer w/ QDs (Advanced)
- MTM Stainless Steel Quick Disconnects
- Mosmatic swivel on the inlet of the sprayer
- Low Trigger Force Trigger
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects
- MTM fittings Warranty: 60 Days, for manufacturing defects. (This does not include o-rings)

OG Spec Mosmatic Swiveling Sprayer (Ultimate)
- T304 Stainless Steel Quick Disconnects
- Mosmatic swivel integrated into the sprayer handle
- Low Trigger Force Trigger
- Custom blue faceplate with Obsessed Garage logo
- Max Tempurature: 300 °F (150 °C)
- Max Pressure: 5,000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Original Mosmatic Wand with Quick Disconnects (Basic/Advanced)
- 20° Bend
- MTM Stainless Steel Quick Disconnects
- Protective Rubber Guard
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Mosmatic Sprayer Warranty: 6 Months, for manufacturing defects
- MTM fittings Warranty: 60 Days, for manufacturing defects. (This does not include o-rings)

OG Spec Mosmatic Wand (Ultimate)
- 20° Bend
- T304 Stainless Steel Quick Disconnects
- Max Temp: 300 °F (150 °C)
- Max Pressure: 5000 PSI (350 BAR)
- Max Flow: 12 GPM (45 L/min)
- Warranty: 6 months, for manufacturing defects (does not include o-rings)

Stainless Steel 1/4" Nozzle 4 Pack (Basic/Advanced)
- Stainless Steel
- ¼” QD Plug Connection
- Warranty: 60 days, for manufacturing defects

OG Spec Mosmatic Nozzle Assembly (Ultimate)
- T304 Stainless Steel
- ¼” QD Plug Connection
- Rubber Nozzle Guard
- Warranty: 6 months, for manufacturing defects

MTM Original Foam Cannon (Basic)
- Brass Foam Cannon Body
- Adjustable spray pattern
- 32oz Bottle
- ¼” QD Plug Connection
- Min Pressure: 1,100 PSI - Max Pressure: 5,000 PSI
- Min Flow: 1.4 GPM - Max Flow: 5.3 GPM
- Max Temperature: 140°F
- Made in Italy
- Warranty: 60 days, for manufacturing defects

MTM PF22.2 Foam Cannon (Advanced/Ultimate)
- Nickel Plated Brass - Single Cast Foam Cannon Body
- Two-way adjustable spray pattern
- 32oz Wide Bottom Bottle
- ¼” QD Plug Connection
- Min Pressure: 1,100 PSI - Max Pressure: 5,000 PSI
- Min Flow: 1.4 GPM - Max Flow: 5.3 GPM
- Max Temperature: 140°F
- Made in Italy
- Warranty: 60 days, for manufacturing defects

This item is shipped from our warehouse at OGHQ in Lady Lake, FL. Shipping costs calculated at checkout.


ETA Information:

Mosmatic Couplers- There is a larger batch arriving in early June.