BendPak HD-9 Standard Four Post Lift
The guys at OG and BendPak have been bugging me about getting an affordable lift offering in the store, and now they're available. The HD-9 is great for those looking to add some extra car storage in their garage. With a 4 post you don't need to worry about concrete depth thanks to its 10"x12" base plates and available caster kit to make it movable. This supports more weight than the HD-7 but features the same low deck runways so you can easily get your lowered car on the lift.
Features & Specifications
- Features
- 9,000-lb. maximum lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
- Freestanding design
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Specs
-
Lifting Capacity*9,000 lbs. (4,082 kg)
- *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
-
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
-
A - Min. Runway Height: 4.5" (114 mm)
-
Max. Rise: 70" (1,778 mm)
-
C - Max. Lifting Height: 74.5" (1,892 mm)
-
Time to Full Rise: 45 seconds
-
D - Overall Width: 110.25" (2,800 mm)
-
E - Outside Length: 174" (4,420 mm)
-
F - Overall Length: 200" (5,080 mm)
-
G - Height of Columns: 88" (2,235 mm)
-
H - Width Between Columns: 100.25" (2,546 mm)
-
I - Drive-Thru Clearance: 86.5" (2,197 mm)
-
J - Runway Width: 19" (483 mm)
-
K - Length of Runways: 164" (4,166 mm)
-
L - Width Between Runways: 37.5" (953 mm) or 44.375" (1,127 mm)
-
M - Runway Centerline: 56.5" (1,435 mm) or 63.375" (1,610 mm)
-
N - Outside Edge of Runways: 75.5" (1,918 mm) or 82.375" (2,092 mm)
-
Rated Capacity: 115" (2,921 mm)
-
75% Capacity: 100" (2,540 mm)
-
50% Capacity: 85" (2,159 mm)
-
25% Capacity: 70" (1,778 mm)
-
Locking Positions: 12
-
Lock Spacing: Every 4" (102 mm)
-
Motor: 220 VAC / 60 Hz / 1 Ph
-
Noise: 45 dB
-
Shipping Weight: 1,746-lbs. (792 kg)
-
Dimensions: 165'' x 22'' x 34'' (4,191 mm x 559 mm x 864 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
FAQ & Support
Free Shipping in the 48 contiguous states to Commercial addresses that do not require a lift gate or fork lift. If you live in a residential area, select the residential shipping option which includes lift gate service.
This item is dropshipped from BendPak in California. Shipping will be calculated at checkout for most addresses. If you cannot get a shipping quote, please reach out to support for a quote.
ETA Information:
Other Products To Consider