This is the new upgraded MTM PF22.2. The main feature is that it doesn't fall over now!
The actual foam cannon hasn't changed in design but the biggest and most requested change is to the bottle. It's been redesigned to sit flat and not fall over when empty.
I open the box on every foam cannon that comes to me and take out the brass 1/4" to M22 part and the crappy 1/4" zinc plug. I replace it with a much higher quality 1/4" stainless steel plug. I don't charge for the better stainless steel plug that I include as a part of the package. If you need the 1/4" Twist N Seal M22 part to connect to your OE Sprayer, you can find it here: M22 MALE TO 1/4" MALE. I had too many people getting confused by the brass piece, so it makes more sense to just leave it out of our version of this foam cannon.
What You Get
MTM PF22.2 Foam Cannon
- 1.1mm Orifice
- 1.25mm Orifice
- ¼” Plug
- M22 Fitting
- PF22.2 Bottle
- Suction Tube
MTM made an adjustment to the foam cannon kit. It now includes a 1.1mm orifice in the box. The foam cannon comes with the standard 1.25mm installed. You want to use the standard 1.25mm with a Kranzle and most gas pressure washers. The smaller 1.1mm should be used with the lower flowing/less expensive electric pressure washer like the SunJoe, AR, Greenworks, Ryobi, etc. I would strongly suggest you don't attempt to use the 1.1mm orifice on any Kranzle. 1.25mm is already working the pump pretty hard on those much higher flowing machines.
Ships from OGHQ Warehouse. Shipping costs calculated at checkout.
FAQ & Support
Here is how I use mine:
- Add 4-5 oz. Koch Chemie GSF.
- Fill with water, by holding submerged in rinse bucket.
- Remove 20" Mosmatic Wand from quick disconnect on Mosmatic HP Spray Gun.
- Attach 1/4" Plug/Foam Cannon to Mosmatic HP Spray Gun quick disconnect.
- Foam the Car.
MTM offers a 60 day warranty for any possible defects with their products. Info about their warranty can be found Here.